Haws portable Model 7500 is ideal for remote locations. Using gravity to supply a continuous flow of clean water to injured personnel for a full 15 minutes at .4 gpm (1.5 L), this model is a reliable source for safety. Recognizing the 7500's full patterned flushing feature, those working in remote areas can't help but feel confident with this piece of emergency equipment day after day.

Model 7500, 16 gallon (60.6 L) capacity gravity operated portable eyewash.

• Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
• A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
• Relocation is simple due to the easily mounted (bracket included) and light design of this 16 gallon (60.6 L) portable
• Measurements: 22-1/2" high, 21-1/2" wide, 19-1/2" deep (57.2 x 54.6 x 49.5 cm)

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Compact portable eyewash Model 7501 is ideal for remote locations. Using gravity to supply a continuous flow of clean water to injured personnel for a full 15 minutes at .4 gpm (1.5 L), this model is a reliable source for safety. Recognizing the 7501's full patterned flushing feature, those working in remote areas can't help but feel confident with this piece of emergency equipment day after day.

Model 7501, 9 gallon (34.1 L) capacity gravity operated portable eyewash.

• Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
• A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
• Relocation is simple due to the easily mounted bracket (included) and light design of this 9 gallon (34.1 L) portable
• Measurements: 14-1/2" high, 22" wide, 10-1/8" (36.8 x 55.9 x 25.7 cm) deep. *Note: Unit must be wall hung

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 7501T240, 9-gallon (34 L), gravity-fed, tempered portable eyewash that uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures to -30®F (-34® C)

Compact portable tempered eyewash model 7501T240 is ideal for remote locations. The 9-gallon (34 L), gravity-fed, eyewash uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures to -30®F (-34® C) for locations without access to a continuous potable water source. The self-contained heating blanket electrical system uses NEMA 4 rated components. 240V, 2A, 1 phase electrical requirement

• Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
• A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
• Relocation is simple due to the easily mounted bracket (included) and light design of this 9 gallon (34 L) portable
• Measurements: 16" high, 24" wide, 12" deep (36.8 x 55.9 x 25.7 cm). *Note: Unit must be wall hung

Built with CSA certified components.

Model 7501T240H, 9-gallon (34 L), gravity-fed, hazardous location tempered portable eyewash that uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures to -30®F (-34® C).

Compact portable tempered eyewash model 7501T240H is ideal for remote locations. The 9-gallon (34 L), gravity-fed, hazardous location eyewash uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures to -30®F (-34® C) for locations without access to a continuous potable water source. The self-contained heating blanket electrical system uses NEMA 4 rated components. 240V, 2A, 1 phase electrical requirement.

• Rated for hazardous location Class 1, Div 2.
• Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
• A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
• Relocation is simple due to the easily mounted bracket (included) and light design of this 9 gallon (34 L) portable
• Measurements: 16" high, 24" wide, 12" deep (36.8 x 55.9 x 25.7 cm). *Note: Unit must be wall hung

Built with CSA certified components.

Model 7500EB, freeze-resistant, 16 gallon (60.6 L) capacity gravity operated portable eyewash with self-contained heater.

Haws heated portable Model 7500EB is ideal for remote locations. Using gravity to supply a continuous flow of clean water to injured personnel for a full 15 minutes at .4 gpm (1.5 L), this model is a reliable source for safety. Recognizing the 7500's full patterned flushing feature, and its capability of being used in sub-freezing temperatures, those working in remote areas can't help but feel confident with this piece of emergency equipment day after day.
 

• Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
• 1000 Watt, 120 VAC submersible thermostatically controlled heater element
• Fully functional to -30® F (-34.4® C) and should stay between 65® and 75® F (18.3 and 23.9® C)
• Model supplied with 8' (243.8 cm) power cord, 3-prong plug, and fitted insulated protective cover
• A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
• Relocation is simple due to the easily mounted (bracket included) and light design of this 16 gallon (60.6 L) portable
• Measurements: 22-1/2" high, 21-1/2" wide, 19-1/2" deep (57.2 x 54.6 x 49.5 cm)

Model 7500EB is certified by CSA to meet the ANSI Z358.1

Eye wash station with 1 x 500 ml eye wash and pictogram. Rinsing time
approx. 5 min.

1,0 l sterile eye wash DUO (0,9 % sodium chloride) for rinsing away foreign bodies from the eye (dirt, dust etc.) Equipped with a special eye device for rinsing both eyes simultaneously. Rinsing time approx. 5 min. per eye. Also for refilling the DUO eye wash stations. According to DIN EN 15154-4.

Emergency station in dust proof box with 1 x 200 ml pH Neutral + 1 x 500 ml
eye wash. Especially suitable in places where there is a risk of eye injuries
involving acids or alkali. Equipped with a mirror inside the lid. Rinsing time approx. 7 min.

Model 7260-7270 wall mounted, plastic bowl eye/face wash with AXION^® MSR eye/face wash head. Without wall bracket

Model 7260-7270 wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.

• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Unit features a round 11" (27.9 cm) green ABS plastic receptor and aluminum
• Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
• Supply: 1/2" NPT. Waste: 1- 1/4" NPT
• ANSI Z358.1 tempering compliance options

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 7260B-7270B wall mounted, plastic bowl eye/face wash with AXION^® MSR eye/face wash head.

Model 7260B-7270B wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.

• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Unit features a round 11" (27.9 cm) green ABS plastic receptor and aluminum wall bracket for long life
• Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
• Supply: 1/2" NPT. Waste: 1- 1/4" NPT
• ANSI Z358.1 tempering compliance options

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 7260BT-7270BT wall mounted, plastic bowl eyewash with AXION^® MSR eye/face wash head.

Model 7260BT-7270BT wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
 

• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Features a round 11" (27.9 cm) green ABS plastic receptor, aluminum wall bracket and tailpiece and trap
• Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
• Supply: 1/2" NPT. Waste: 1- 1/2" NPT
• ANSI Z358.1 tempering compliance options

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 7324 wall mounted eye/face wash with the AXION^® MSR eye/face wash head, without receptor. Floor drain recommended for this unit.

Haws 7324 features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
 

• Unit is equipped with a pop-off dust cover, so when debris is present, the irrigation process stays protected
• Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
• Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested
• Floor drain is recommended for this unit
• ANSI Z358.1 tempering compliance options

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 7360B-7460B, wall mounted, stainless bowl, eye/face wash with AXION^® MSR eye/face wash head.

Model 7360B-7460B wall mounted, eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
 

• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Features a round 11" (27.9 cm) stainless steel receptor and aluminum wall bracket for long life
• Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
• Supply: 1/2" NPT. Waste: 1- 1/4" NPT
• ANSI Z358.1 tempering compliance options

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 7360BT-7460BT wall mounted, stainless bowl eye/face wash with AXION^® MSR eye/face wash head.

Model 7360BT-7460BT wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
 

• Eyewash streams provide zero vertical velocity stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Features a round 11" (27.9 cm) stainless steel receptor, aluminum wall bracket and tailpiece and trap
• Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
• Supply: 1/2" NPT. Waste: 1- 1/2" NPT
• ANSI Z358.1 tempering compliance options

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 7360BTWC, barrier-free, wall mounted eye/face wash with AXION^® MSR eye/face wash head, with tailpiece and trap.

The Haws 7360BTWC barrier-free emergency eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Unit is equipped with an in-line 50 x 50 mesh water strainer and flip top dust covers, so when debris is present, the irrigation process stays protected. Space efficient design allows the 7360BTWC to be mounted in a number of easily accessible locations while providing a barrier-free standard.
 

• Low profile design accommodates wheelchair access
• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested. Unit also comes with trap and tailpiece to meet desired wall mounting requirements
• ANSI Z358.1 tempering compliance options

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 7361-7461, pedestal mounted, stainless bowl eye/face wash with AXION^® MSR eye/face wash head.

Model 7361-7461 pedestal mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.

• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Features a round 11" (27.9 cm) stainless steel receptor and 1-1/4" NPT galvanized stanchion
• Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
• Supply: 1/2" NPT. Waste: 1- 1/4" NPT
• ANSI Z358.1 tempering compliance options

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 7433FP, wall-mounted, freeze protected eyewash with Soft-Flo heads.

Haws emergency eyewash systems, like the freeze protected 7433FP, use anti-surge Soft-Flo heads that activate with the push of a stainless steel flag. Heads come equipped with pop-off dust covers, so when debris is present, the irrigation process stays protected. Space efficient design and integral wall bracket allow the 7433FP to be mounted in a number of easily accessible locations.
 

• A great addition to multiple unsafe environments where the eyes may be exposed to corrosive materials
• Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
• Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested
• Fully functional in freezing environments when installed properly
• Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment

Model 7460, unmounted eye/face wash with AXION^® MSR eye/face wash head.

Model 7460 unmounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
 

• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Features a round 11" (27.9 cm) stainless steel receptor
• Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
• Supply: 1/2" NPT. Waste: 1- 1/4" NPT
• ANSI Z358.1 tempering compliance options

Model 7620 AXION^® eyePOD^® is a polished stainless steel, faucet-mounted eyewash.

Model 7620 AXION eyePOD (patent pending) faucet mounted eyewash incorporates the revolutionary inverted flow design, which is the only on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctor office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. The symmetrical 'pod' look of the eyewash is constructed of stainless steel and given a polished finish for a durable, esthetically pleasing piece of emergency equipment that can be used for industrial situations and doctors offices alike.

• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Thermostatic shutoff that will protect the user from water over 100® F (37.8® C) by shutting off the eyewash
• Supplied with a standard 55/64-27 female connection. Have a different size? Haws has that covered also with 4 other of the most commonly used faucet adapters including a 15/16-27 male, 13/16-27 male, 3/8-18 male and 13/16-24 female, to accommodate most home, commercial and lab faucet applications
• Also supplied is a 1 gpm (3.8 L) laminar flow faucet outlet for hospitals or anywhere a precise flow pattern is a must
• Dim; Diameter 3.5 in. (8.9 cm), height (from top to faucet outlet) 2 in. (5 cm)

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 8335, corrosion-resistant, stainless steel combination shower with AXION^® MSR eye/face wash and showerhead.

Haws Model 8335 stainless steel combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. The combination unit is equipped with an in-line 50 x 50 mesh water strainer and eyewash dust cover, so when debris is present, the irrigation process stays protected. A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials.
 

• Features an 11" (27.9 cm) stainless steel bowl and 9" (22.9 cm) floor flange
• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Requires minimal maintenance and is equipped with test card to record weekly testing
• AXION MSR ABS drench showerhead with flow control delivers dispersed flow for uniform drenching
• Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested
• Solid 1-1/4" Type 304 Stainless Steel construction makes for one sturdy piece of corrosive resistant equipment
• Provided with universal emergency sign and high visibility stripe
• Supply and Waste: 1-1/4" NPT

Model 7610, barrier-free, single action swing-down eye/face wash with AXION^® MSR eye/face wash head.

Lab units like the 7610 barrier-free wall or deck mount pull down eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
 

• Unit can be deck or wall mounted with easy change-over instructions
• Extended-length pull down arms are designed to accommodate wheelchair access
• Eye/face wash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Dust cover allows for the 7610 to stay protected from debris when not in use
• Activation and deactivation occur at a 30 degree angle from horizontal limiting splash of water onto counter or wall
• Rear mount design allows the sink to remain open to other uses
• ANSI Z358.1 tempering compliance options

Model 7611, single action swing-away eye/face wash with AXION^® MSR eye/face wash head designed to be mounted on left or right side of sink.

Lab units like the 7611 swing-away eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
 

• Dust cover allows for the 7611 to stay protected from debris when not in use
• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Side mount design allows the unit to be mounted from either side of the sink to better fit numerous locations
• ANSI Z358.1 tempering compliance options
• Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment

Model 7612, swing-away eyewash designed to be mounted on right side of sink, with AXION^® MSR stainless steel eye/face wash head.

Model 7612 sink or deck mounted eye/face wash features the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. When not in use, this unit utilizes a swing-away feature so the area stays clear for everyday use.
 

• A Dust cover allows the 7612 to stay protected from debris when not in use
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Side mount design allows the unit to be mounted from the right side of the sink
• ANSI Z358.1 tempering compliance options
• Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment

Model 7612LH, swing-away eyewash designed to be mounted on left side of sink, with AXION^® MSR stainless steel eye/face wash head.

Model 7612LH sink or deck mounted eye/face wash features the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. When not in use, this unit utilizes a swing-away feature so the area stays clear for everyday use.
 

• A dust cover allows the 7612LH to stay protected from debris when not in use
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Counter top mounted on the left side of a sink
• ANSI Z358.1 tempering compliance options
• Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment

Model 7655WCC, barrier-free, recessed wall-mounted pull down eye/face wash with AXION^® MSR eye/face wash head, in a stainless steel cabinet.

Model 7655WCC barrier-free eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
 

• Easy access exterior mounted in-line strainer
• 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smudge resistant bead blast finish
• The eye/face wash head is easily activated by the emergency equipment's pull-down design
• ANSI Z358.1 tempering compliance options

Model 7656WCC, barrier-free, recessed wall-mounted pull down eye/face wash with AXION^® MSR eye/face wash head, in a stainless steel cabinet with a drain pan.

Model 7656WCC barrier-free, recessed eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
 

• The hide-away design allows the 7656WCC to stay protected from debris when not in use
• 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smudge resistant bead blast finish
• One piece drain tray catches waste fluid during eyewash use
• Easy access exterior mounted in-line strainer
• The eye/face wash head is easily activated by the emergency equipment's pull-down design
• ANSI Z358.1 tempering compliance options

Model 7655WCSM, wheelchair accessible surface mounted pull down eye/face wash with AXION^® MSR eye/face wash head, in a stainless steel cabinet.

Model 7655WCSM wheelchair accessible surface mounted eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
 

• Perfect for mounting on block or solid walls which cannot be cut into
• Easy access exterior mounted in-line strainer
• 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smudge resistant bead blast finish
• The eye/face wash head is easily activated by the emergency equipment's pull-down design
• ANSI Z358.1 tempering compliance options

Model 7777, pedestal-mounted eye/face wash with AXION^® MSR eye/face wash head, and all stainless steel components.

Model 7777 all stainless steel pedestal mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Unit also is equipped with an in-line 50 x 50 mesh water strainer and stainless steel dust cover so when debris is present, the irrigation process stays protected. Solid mounted pedestal design allows the 7777 to be placed securely in multiple locations.
 

• A great addition to unsafe environments where the eyes and face may be exposed to corrosive materials
• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested
• Corrosion resistant construction from Type 304 Stainless Steel make for one corrosive resistant piece of equipment
• ANSI Z358.1 tempering compliance options
• Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment

Model 8300-8309, combination emergency shower & eye/face wash with AXION^® MSR eye/face wash and showerhead.

Model 8300-8309 combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity.

Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.

• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
• Also features a stainless steel push flag for eyewash activation, a round 11" (27.9 cm) stainless steel bowl, stainless steel pull rod for shower activation, mesh in-line eyewash strainer to collect line debris, and ball valves with stainless steel ball and stem for durability
• Pipe and fitting: 1-1/4" Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4" NPT
• ANSI Z358.1 tempering compliance options

Model 8300CRP-8309CRP, corrosion-resistant, coated combination shower & eye/face wash with AXION^® MSR eye/face wash and showerhead.

Model 8300CRP-8309CRP corrosion resistant combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
 

• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
• Also features a stainless steel push flag for eyewash activation, stainless steel pull rod for shower activation, a round 11" (27.9 cm) stainless steel bowl, mesh in-line eyewash strainer to collect line debris, and ball valves with stainless steel ball and stem for durability
• 1-1/4" Schedule 40 hot-dipped galvanized steel piping with green corrosion resistant epoxy coating protects for years of service. Supply and Waste: 1-1/4" NPT

Model 8300FP, freeze protected, combination shower and Soft-Flo eyewash with stainless steel receptor and AXION MSR®® showerhead.

The Haws freeze protected 8300FP combines the use of an ABS showerhead and anti-surge Soft-Flo eyewash heads for the irrigation process. Emergency combination unit is equipped with an in-line 50 x 50 mesh water strainer and pop-off dust covers, so when debris is present, the irrigation process stays protected. Virtually eliminating mishaps, the unit's safety features include: universal emergency sign, high visibility stripe, two labeled push plates, and two self-draining bleed valves to protect from internal freezing.
 

• A great addition to unsafe environments where the eyes and body may be exposed to corrosive materials
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, eyewash is pre-built and fully water/pressure tested
• Solid galvanized steel construction make for one sturdy piece of emergency equipment

Model 8309WC, barrier-free, combination shower and eye/face wash with AXION^® MSR eye/face wash and showerhead.

Model 8309WC barrier-free combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.

• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
• Barrier-free design offers a low profile loop assembly allowing for better wheel chair access as well as a longer pull rod for shower activation
• Also features a stainless steel push flag for eyewash activation, a round 11" (27.9 cm) stainless steel bowl, stainless steel pull rod for shower activation, and ball valves with stainless steel ball and stem for durability
• Pipe and fitting: 1-1/4" Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4" NPT
• ANSI Z358.1 tempering compliance options

Model 8317, combination shower and eye/face wash with AXION^® MSR eye/face wash and showerhead, with no receptor.

Haws 8317 features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
 

• A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested
• Solid galvanized steel construction makes for one sturdy piece of emergency equipment

Model 8317CTFP cable heated, freeze protected, combination shower and eye/face wash, with top or bottom supply, 220 VAC, and with AXION^® MSR eye/face wash and showerhead.

Haws Model 8317CTFP heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit's safety features include: a thermal actuator bleed valve, 220V thermostat cable double wrapped piping, 3/4" (1.9 cm) insulation surrounding piping and outside jacket to prevent freezing, as well as a universal emergency sign.
 

• Perfect for extreme weather conditions dropping down to -30® F (-34.4® C)
• Universal design allows for top or bottom water supply
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, entire unit is pre-built and fully pressure tested
• Solid stainless steel pipe stanchion and galvanized fittings make for one sturdy piece of corrosive resistant equipment
• Rated Class 1, Division 2, Group B, C and D

Model 8317CTFP ATEX, 220 VAC cable heated, freeze protected, combination shower and eye/face wash, with top or bottom supply, and rated for C1D1 applications, and with AXION^® MSR eye/face wash and showerhead.

Haws Model 8317CTFP ATEX heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit's safety features include: a thermal actuator bleed valve, 120V thermostat cable double wrapped piping, 3/4" (1.9 cm) insulation surrounding piping and outside jacket to prevent freezing, as well as a universal emergency sign.
 

• Perfect for extreme weather conditions dropping down to -30® F (-34.4® C)
• Universal design allows for top or bottom water supply.
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, entire unit is pre-built and fully pressure tested
• Solid stainless steel pipe stanchion and galvanized fittings make for one sturdy piece of corrosive resistant equipment
• Rated Class 1, Div 1, Group B, C & D. Tempering code T6

Model 8327, combination shower and eye/face wash with AXION^® MSR eye/face wash and showerhead, with a stainless steel grate

Model 8327 combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal shower heads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
 

• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
• Also features a stainless steel grate for shower and eye was activation, mesh in-line eyewash strainer to collect line debris, and ball valves with stainless steel ball and stem for durability
• Pipe and fitting: 1-1/4" Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4" NPT
• ANSI Z358.1 tempering compliance options

Model 8330, corrosion-resistant, all stainless steel combination shower with AXION^® MSR eye/face wash and showerhead.

Haws Model 8330 stainless steel combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. The combination unit is equipped with an in-line 50 x 50 mesh water strainer and eyewash dust cover, so when debris is present, the irrigation process stays protected. A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials.
 

• Features an 11" (27.9 cm) stainless steel bowl and 9" (22.9 cm) floor flange
• Eyewash streams provide Zero Vertical Velocity^™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Requires minimal maintenance and is equipped with test card to record weekly testing
• AXION MSR stainless steel drench showerhead with flow control delivers dispersed flow for uniform drenching
• Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested
• Solid 1-1/4" Type 304 Stainless Steel construction makes for one sturdy piece of corrosive resistant equipment
• Provided with universal emergency sign and high visibility stripe
• Supply and Waste: 1-1/4" NPT

Model 8356WCSM, surface mounted combination shower and eye/face wash with AXION^® MSR eye/face wash head and ceiling-mounted showerhead, along with a drain pan.

Model 8356WCSM wheelchair accessible surface mounted combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Emergency combination unit is equipped with a stainless steel drain pan, so when the irrigation process begins, the unit is draining waste properly. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
 

• Perfect for mounting on block or solid walls which cannot be cut into
• Easy access exterior mounted in-line strainer
• One piece drain tray catches waste fluid during eyewash use
• 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smudge resistant bead blast finish
• Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested

Model 8605WC, barrier-free, booth enclosed combination shower and eye/face wash with AXION^® MSR eye/face wash and showerhead.

The Haws 8605WC barrier-free enclosed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
 

• A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, the entire unit is pre-built and fully pressure tested
• Solid reinforced molded fiber glass booth makes for a private free standing piece of emergency equipment

Model AX14, AXION Advantage^® eye/face wash and shower upgrade system.

The Haws^® AX14 AXION Advantage^® eye/face wash and shower system is designed to replace outdated, under-performing or in some cases, non-conforming installed emergency eyewash/shower combinations with the medically superior AXION^® MSR performance. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors®? office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. System includes the AXION MSR eye/face wash head and showerhead, the necessary connecting hardware, along with a tape measure, eyewash measuring gauge and written guidelines to assure installation complies with the ANSI Z358.1 standard. System is designed to replace the eyewash and shower head of most standard floor standing emergency combination stations manufactured by Acorn^®, Bradley^®, Encon^®, Guardian and Speakman^®.

Model AX14S, AXION Advantage^® stainless steel eye/face wash and shower upgrade system.

The Haws^® AX14S AXION Advantage^® stainless steel eye/face wash and shower system is designed to replace outdated, under-performing or in some cases, non-conforming installed emergency eyewash/shower combinations with the medically superior AXION^® MSR performance. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors®? office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature®?s ocular cavity drain. AXION MSR also offers a hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. System includes the AXION MSR stainless steel eye/face wash head and showerhead, the necessary connecting hardware, along with a tape measure, eyewash measuring gauge and written guidelines to assure installation complies with the ANSI Z358.1 standard. System is designed to replace the eyewash and shower head of most standard floor standing emergency combination stations manufactured by Acorn^®, Bradley^®, Encon^®, Guardian and Speakman^®.

Model 8904, counter-mounted eye/face wash with AXION^® MSR eye/face wash and body spray head, with 8 foot (243.8 cm) green hose.

Haws 8904 deck mounted eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Unit is activated with simple squeeze lever operation.
 

• Dust cover allows for the 8904 to stay protected from debris when not in use
• Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
• 8 foot (243.8 cm) green hose provides an extended coverage area to further optimize the irrigation process
• In order to comply with state codes the use of a vacuum breaker is required with all hand held eye/face wash body spray units (Haws offers model SP212)

Model 8905, wall-mounted eye/face wash with AXION^® MSR eye/face wash and body spray head, with 12 foot (365.8 cm) yellow recoil hose.

Haws 8905 features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Unit is activated with simple squeeze lever operation.
 

• Dust cover allows for the 8905 to stay protected from debris when not in use
• Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
• 12 foot (365.8 cm) yellow recoil hose provides an extended coverage area to further optimize the irrigation process
• In order to comply with state codes the use of a vacuum breaker is required with all hand held eye/face wash body spray units (Haws offers model SP212)

PERFORMANCE SERIES: Model 8710 standard decontamination booth with an internal hot water supply, tempering system, space heater and light. Includes the AXION^® MSR eye/face wash and shower head, drench hose assembly with freeze and scald protection bleed valves, and alarm system.

PERFORMANCE SERIES: Model 8710 standard decontamination booth is a heated shower and eye/face wash booth that supplies tempered water for flushing during emergency situations in all-weather conditions. The Advanced Programmable Monitoring Control System allows for real-time control of the operating system. The 5' x 9' (1.52 x 2.74 m) booth has an R-value of 11, provides an operating temperature range of -30® to 100® F (-34® to 38® C), and is loaded with features including spring-loaded self-closing doors, an equipment room door, a removable service door, large directional arrows, large and small universal shower/eyewash instructional signs, and a fiberglass floor grate.The ultimate in safety is present with a 20 gpm (75.7 L) AXION^® hydrodynamic shower head, and an eye/face wash that features the medically acclaimed AXION^® MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity, along with 3 gpm (11.4 L) to supply the side hanging drench hose. Its flexibility to do more is apparent when it can be used as a complete stand-alone decontamination unit and used as a multiple shower feeder, because it can operate with a number of tempering and electrical options. Because the 8710 can be specified with a number of different hot water supply options, electrical options, blending options, and multi-unit supply capabilities, it is adaptable to almost any emergency shower requirement. Standard electrical system is equipped with 480V 3ph, and is easily adapted for other voltages upon request. Combination shower and eyewash is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

PERFORMANCE SERIES: Model 8720 standard heated enclosed emergency shower and eyewash with overhead water storage for areas with no water supply.

PERFORMANCE SERIES: Model 8720 standard heated enclosed shower and eyewash is designed for remote areas where there is no water supply. The unit shall include an all-weather foam booth which provides an operating temperature range of -30® to 100® F (-34® to 38® C), and shall include dual spring-loaded, self-closing shower doors, the booth is trimmed with large directional arrows, large and small universal shower/eyewash signs, fiberglass floor grate, and 3" IPS drain. The internal booth temperature is maintained by an natural convection 2.5 kW space heater. The over-head 430 gallon (1628 L) tank is made of stainless steel, and the water temperature is maintained by an immersion heater. Standard electrical system is equipped with 480V 3ph. The emergency flushing is provided by a hydrodynamic shower and the medically superior AXION^® MSR eyewash head assembly (Patent pending). Designed to comply with Seismic Zone C.

PERFORMANCE SERIES: Model 8730 standard decontamination booth includes the AXION^® MSR eye/face wash and shower head, drench hose, freeze and scald protection bleed valves, alarm system, light and space heater.

PERFORMANCE SERIES: Model 8730 standard decontamination booth is a completely enclosed shower and eye/face wash booth designed to provides an operating temperature range of -30® to 100® F (-34® to 38® C) in case of an emergency in the most adverse of conditions. Its use of an all-weather foam insulated booth with an internally mounted space heater provides an environment that is safe and comfortable for the user. The ultimate in safety is present with a 20 gpm (75.7 L) AXION^® hydrodynamic shower head, and an eye/face that features the medically acclaimed AXION^® MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity, along with 3 gpm (11.4 L) to supply the side hanging drench hose. During an emergency, a flow-switch activated alarm is sounded and a flashing warning light is triggered. Large graphics and universal signs make everyone present aware that the booth is ready for emergencies.Combination shower and eyewash is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 8770 gravity fed emergency shower and eyewash.

Model 8770 shower and eyewash shall include a stainless steel structure with bright yellow elastomeric chemically resistant water-proof side panels and 430 gallon (1628 L) overhead tank. The emergency flushing is provided by a hydrodynamic showerhead as well as the medically acclaimed AXION^® MSR eyewash. (patent pending) This system is designed to operate with a number of tempering and electrical options.

Model 8163, concealed ceiling supply drench shower with AXION^® MSR polished stainless steel showerhead and extra long pull rod.

Model 8163, concealed ceiling supply drench shower features the AXION MSR hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Outfitted with safety features like a self-regulating shower stream and universal emergency sign, this drench shower is designed for safety.
 

• Concealed piping and a high polished showerhead provides an aesthetically pleasing piece of equipment
• A great addition to multiple potentially unsafe environments where the body may be exposed to corrosive materials
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reduced installation time with a pre-built valve assembly
• Wheel chair accessible when installed to ADA guidelines
• Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment